Month: November 2012

80℃ Celsius Degrees Low Temperature Processing EVA Film for Laminating PDLC FILM(Smart Glass Film, Privacy Film, Magic Film, LED Film)

80℃ Celsius Degrees Low Temperature Processing EVA Film for Laminating PDLC FILM(Smart Glass Film, Privacy Film, Magic Film, LED Film)

www.SmartestGlass.com www.EVAfilm.com

80℃ Celsius Degrees Low Temperature Processing EVA Film for Laminating PDLC FILM(Smart Glass Film, Privacy Film, Magic Film, LED Film)

+80℃ Celsius Degrees Low Temperature Processing
–Because of our patented modification of EVA Film formula, the CNC4SG EVA Film can activate the cross-link reaction at 80℃ Celsius Degrees. Due to this low temperature laminating advantage, when laminating smart glass with CNC4SG EVA FILM, the smart PDLC film is only in the 80℃ Celsius Degrees environment and so can be protected from too high temperature(other EVA film needs 130℃ to activate cross-link reaction.)

+Bubbles Problem:
–High bubbles possibility-With Smart Glass Film sandwiched inside two glasses, the Pre-Laminated Smart Glass is easier to get bubbles than just laminating two glasses only. This problem has troubled the Smart Glass manufacturer very much for long time, because Smart Glass Film is high cost, they can not burden the cost of failure of laminating processing.

 

 

 

 

 

 

 

 

 
+Bubbles Solutions:
–Advantage 1: Higher Melt-Flow-Rate. The main way we do is that we specially modify a type of EVA Film for Smart Glass Lamination: CNC-Force-4SG EVA, which is specially higher in Melt-Flow-Rate to make the melting EVA Film can fill the glass and smart film surface more easily and sufficiently to reduce the chance of bubbles. Less bubbles means higher yield rate. High yield rate means cost reduction of your lines.

 

 

 

 

 
–Advantage 2: Lower Viscosity. Second, we modify the Viscosity of EVA Film to make the Melting EVA Film can go through and fill the glass and smart glass film surface concave-convex more easily and sufficiently to reduce the chance of bubbles. Less bubbles means higher yield rate. High yield rate means cost reduction of your lines.

(Laminar shear of fluid between two plates. Friction between the fluid and the moving boundaries causes the fluid to shear. The force required for this action is a measure of the fluid’s viscosity. )

 

 

 

 
–Advantage 3: Dust-Free. The other advantage of CNC-Force-4SG EVA is that the EVA Film is produced with MOST care of dust-free, no contamination and cleanness.We specially pay highest attention to the producing and package of CNC-Force-4SG EVA to make sure the EVA Film is very clean and away from dust and contamination. Lest contamination means higher yield rate. High yield rate means cost reduction of your lines.

 

All rights reserved by CNC-INTERLAYER TECH:
【Product 1】CNC-Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
【Product 2】CNC-Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
Web: www.CNCnext.com
Mail: [email protected]
[email protected]/
[email protected]